Turbo Lift Pendent Button Control 2.5 Ton Portable Gantry Crane

Product Description

ISO Certificate Turbo Lift Pendent button control Rubber Tyre 2.5 Ton Portable Gantry Crane
 
Product description of Portable Gantry Crane

The turbo lift gantry crane is a small gantry crane. The lifting tonnage and span of this product are set, while the height is set within a range. Therefore, the gantry crane can be adjusted from one height to another height.

This product adopts turbine lift in height adjustment. We will set several height gears according to customers' requirements. During adjustment, you only need to shake the turbine handle to control the rise and fall of gantry crane.

Compared with the ordinary gantry crane, this product is more practical and can meet our work needs in different places.

 
Technical parameters of Portable Gantry Crane

Features of Portable Gantry Crane

1. Good sealing performance.The guide chain adopts fully closed design, which makes the construction more convenient for control and higher degree of environmental protection.

2. Reverse braking is adopted to improve braking performance and prolong braking life. It can adapt to different wet or high temperature environments (it is recommended to purchase special types of gantry crane equipment if it needs to work in special environments for a long time).

3, the brake clutch gearbox basically does not need maintenance, at the same time can reduce the number of maintenance, reduce the maintenance cost.

4. Equipped with high-power and high-power margin cylindrical asynchronous motors, there is no need to worry about battery life in electric operation;It can also be moved manually (up to 5 tons).

5. Fast lifting speed and high working level can completely meet the requirements of different production beats and production intensity.

6. Comprehensive introduction of cutting-edge, with high wear resistance, aging resistance round steel chain, long service life, good wear resistance.

Detection and use of Portable Gantry Crane

1. The newly installed electric gantry crane should be tested, and the next test can be started after checking that there is no abnormality in each function.

2. Carry out rated load test.This has been done before the manufacturer leaves the factory. Users can get detailed information by looking at the test report.

3. Before the formal use of the electric gantry crane, safety knowledge training shall be conducted for the construction personnel to ensure that everyone can pay attention to the safety problems during the use of the gantry crane.

4. Operators must have received professional operation training of gantry crane. Before use, they should carefully read the equipment manual to understand its model parameters and performance strength.

5. The electric gantry crane will be used with the electric hoist. There are two sets of buttons on the controller, one of which is the electric hoist button and the other is the gantry crane button.No matter the electric hoist is operated up and down or the gantry crane is moved from side to side, it is forbidden to press two buttons in opposite direction at the same time when using.

6. All aspects of the newly installed electric gantry crane must be checked again within 10 days after it is used. Any abnormity should be dealt with in time and records should be made.

Packing and shipping of Portable Gantry Crane